EntryType (MarketExecution/LimitOrder/StopLimitOrder/Automatic/FractalMarket/HighlowMarket/Zone) - EntryTypeFrame/PointBuffer

EntryType:

Market Execution: ARYA will place an order directly when you click on BUY or SELL. You will enter the position at the market price in the chosen direction.

Limit Order: Fill in the EntryValue field the price at which you want ARYA to enter a position.
To sell, the set price must be above the current market price. To buy, the set price must be below the current market price.

Stop Limit Order (inverse of the Limit Order): Enter in the EntryValue field the price at which you want ARYA to enter a position. To sell, the set price must be below the current market price. To buy, the set price must be above the current market price.

ConditionalOrder: Fill in the EntryValue field with the price that which you wish to enter a position at and click on BUY or SELL depending if you wish to buy or sell, and ARYA will directly place the correct type of order, either a LimitOrder or a StopLimitOrder depending on the selected price.
Ex: when you enter a price of 12000, ARYA will automatically detect whether to place a LimitOrder or a StopLimitOrder.

Automatic: ARYA will place orders automatically according to the parameters defined in the AutomaticMode field.

Automatic Mode:

Fractal: ARYA identifies the confirmed fractal available in the direction chosen to enter the position: up to buy, down to sell.
If you want to buy, it will consider the last available upside confirmed fractal (set of five finished candles represented by a gray arrow).
MovingAverage: ARYA will place a StopLimitOrder or a Next LimitOrder if the chosen moving average is above or below the current market price. Fill in the chosen moving average value in the EntryValue field.
Example: You have chosen the 50 moving average. If you wish to buy and the market price is above the 50 moving average, a LimitOrder will be placed, otherwise a StopLimitOrder will be placed.
HighLow: ARYA will place an order on the high of the previous candle for buying and the low of the previous candle for selling according to the chosen time unit. If the high or low of the candle is too close to the current market price the broker will block the opening of the trade because of the spread. Be careful not to use a too small UT, ARYA will not be able to place an order.
%Var: Fill in the chosen value in the EntryValue field. ARYA will place a trade based on the price movement in the market. Select the percentage value as well as the direction of your market entry (buy or sell). For example, if you choose "-5" and buy, when the market has fallen by 5%, ARYA will buy. If you choose "0.5" and sell, once the market has had a bullish variation of 0.5%, ARYA will enter a sell position.
CCI (commodity channel index): ARYA will place a buy order when the CCI indicator crosses above the value ''-100 '' on the histogram, for example when it goes from ''-105 '' to '' '-95''. The order will be placed at the close of the candle.
She will place a sell order when the CCI indicator crosses down the value “+100”, for example when it goes from “+108” to “+92”.
Consider adding the CCI indicator to your chart.
MACD: ARYA will place a buy order when the indicator line crosses above 0 in the histogram. The order will be placed at the close of the candle.
It will place a sell order when the indicator line crosses below 0. Consider adding the MACD indicator to your chart.
CloseMovingAverage: If you choose the 50 moving average, ARYA will place a buy order when the market price breaks above the moving average and a candle closes above the 50 moving average. a wick, ARYA will not take this candle into account to place an order and will wait for a true close of the body of the candle to enter the position.
Fill in the chosen moving average value in the EntryValue field.
ClosePriceFractal: Works with Price and Fractal. If you choose Fractal, ARYA will identify an order trigger fractal. Thus, when buying, when a candle closes above this fractal, ARYA will trigger an order. Once the first trade is finished it will replace a trade on the same pattern at the next available fractal and so on each time a trade closes.
If it is only a wick, ARYA will not place an order. If you choose Price, and you set for example: 12,500, when buying, when a candle closes above 12,500, ARYA will trigger an order. With each finished trade, it will re-place a trade with an entry level at that price level.
If it is only a wick, ARYA will not place an order.
Fill in the value of the chosen price in EntryValue.

GreenCloseCandle: If you want to buy and the market goes down, ARYA will wait for the last candle of the fractal to close green (up) to enter a buy position.
RedCloseCandle: If you want to sell and the market goes up, ARYA will wait for the last candle in the fractal to close red (down) to enter the position.
IchimokuKijun: If you want to buy, ARYA will place an order when the market price crosses the Kijun and the candle closes above it.
If it is only a wick, ARYA will not fit into position. If you wish to sell, ARYA will place an order when the market price crosses the Kijun and the candle closes below it.
Consider adding the Ichimoku indicator to your chart.
IchimokuTenkan: If you want to buy, ARYA will place an order when the market price crosses the Tenkan and the candle closes above it. If it is only a wick, ARYA will not fit into position.
If you wish to sell, ARYA will place an order when the market price crosses the Tenkan and the candle closes below.
Consider adding the Ichimoku indicator to your chart.
MMCross: ARYA will place an order when the two chosen moving averages cross and a candle closes above the two moving averages for a buy and below for a sell.
If it is only a wick, ARYA will not place an order. Choose moving averages in the EntryValue field. You can accumulate up to 3 moving averages. If you want to choose the 7 and 20 moving averages, write them down like this: 7/20 or 7/20/50 if you want to add the 50 moving average to it.
FractalR (reverse): When buying ARYA will take into account the last low confirmed fractal available as a reference base, you will then enter the position at the close of the last candle of the fractal.
When selling, it will take into account the last high confirmed fractal available as a reference point and then you will enter the position at the close of the last candle of the fractal.
EntryTimeFrame: Allows you to enter a position on a time unit different from the one you are viewing. For example, you can ask ARYA to watch the candles and enter a position on the fractals in M15 while you visualize the candles in H1. You can also choose "current", ARYA will then take into account the unit of time you are viewing.

EntryPercentBuffer: Allows you to shift your entry into the market position by a few percent relative to the entry point identified by ARYA or defined by you depending on the position entry mode chosen.

RiskValue: Enter the value of the risk you want to take for each trade.

FractalMarket: Entry into position on fractal, when the market is at the level of the fractal, ARYA enters a market position. It does not place a conditional order, but enters the market at this defined level. Takes into account the spread.

HighlowMarket: Market entry on the high or low of the current candle. Define the time unit that will be taken into account for the position entry. It does not place a conditional order, but enters the market at this defined level.

Zone: Entering the fractal reverse position. ARYA will place a buy limit order on the fractal level (low) and will enter the position as soon as the market has reached the entry point the entry point placed on the last reverse fractal. Works with volatile StopLoss, percentage, price and point. Works with StopLoss point, volatility, price, percentage.